Main product

Overview


Our EXP-SP-0102-8K packs a punch as it is a powerful plug-and-play 8K HDMI splitter that has the ability to send uncompressed up to 8K@60Hz or 4K@120Hz up to two displays, but the most useful feature of this splitter is that the second output can scale content down from either 8K>4K or 4K>1080p! Furthermore, its compatible with DSC (Display Stream Compression) version 1.2a pass-through, an approved method of compression in accordance to the HDMI 2.1 specification, allowing up to a lossless 10K@120Hz signal to be transmitted.

Tailored for RETAIL

Split captivating 8K source content between two 8K displays in the retail environment to showcase the powerful capabilities of the emerging resolution in consumer TV’s on the show floor.

SCALING SOLUTIONS

As early adopters of 4K and 8K signal distribution, we know that retrofitting is important in the dawn of new resolution standards. With our splitter, you can rest assured that you won??t be forced to upgrade all displays or AVRs to 8K to reap its benefits. Just set the splitter to downscale to 4K and enjoy 8K content while supporting 4K at the same time!

EDID MANAGEMENT

Display compatibility is the last thing you need to worry about. Our splitter gives you 5 EDIDs that can be adjusted via dipswitches. The splitter also supports Smart EDID, which will auto-negotiate EDIDs based on the detected displays and adjust accordingly.

8K AND BEYOND

Our Essentials 8K splitter not only meets 8K demands but they??re empowered with DSC passthrough, an approved method found in the HDMI 2.1 specification to transmit super-high bandwidth content (up to 10K@120Hz!) producing mathematically lossless content.

COMPLETE YOUR SETUP

WyreStorm offers HDMI 2.1 cables in a number of different lengths and flavors. Use our passive 2.1 cables for short distances up to 3m (9ft). If you need to go a long distance take advantage of our Active Optical 2.1 cables that can reach 15m (50ft).




At-a-glance


  • FRL to TMDS and TMDS to FRL mode conversion

  • S/PDIF audio output from HDMI de-embed

  • Small compact size for discrete installations

  • Supports HDMI2.1 features such as QFT (Quick Frame Transport), QMS (Quick Media Switching), ALLM (Auto Low Latency Mode) and VRR (Variable Refresh Rate)

  • Supports up to 40Gbps FRL and 18Gbps TMDS




Reasons to buy

  • FRL to TMDS and TMDS to FRL mode conversion
  • S/PDIF audio output from HDMI de-embed
  • Small compact size for discrete installations
  • Supports HDMI2.1 features such as QFT (Quick Frame Transport), QMS (Quick Media Switching), ALLM (Auto Low Latency Mode) and VRR (Variable Refresh Rate)
  • Supports up to 40Gbps FRL and 18Gbps TMDS

Specification

Technical Description:

Features
Dolby technologies:
Dolby Atmos, Dolby Vision
Data transfer rate:Rate at which data can be transferred. Usually expressed in units per second. May vary with network configurations.
40 Gbit/s
High Dynamic Range (HDR) technology:
Dolby Vision, High Dynamic Range 10+ (HDR10 Plus), Hybrid Log-Gamma (HLG)
High Dynamic Range (HDR) supported:
Yes
Extended display identification data (EDID):
Yes
HDCP version:
2.3
Maximum refresh rate:
60 Hz
Maximum resolution:The maximum number of pixels that can be displayed in the image. It is usually quoted as width × height,: for example, "1024 × 768" means the width is 1024 pixels and the height is 768 pixels.
10240 x 4320 pixels
Product colour:
Black

Packaging content
AC adapter included:
Yes

Packaging data
Quantity per pack:The amount in each pack.
1 pc(s)

Ports & interfaces
HDMI version:
2.1
Video out:
2x HDMI
Video port type:The type of socket in the device for connecting a video e.g. SCART.
HDMI
Video ports quantity:The number of ports (sockets) for video input or output.
3

Power
Power consumption (max):The maximum amount of power used by the device.
3.5 W
Output current:
1 A
Output voltage:
12 V

Product details

EXP-SP-0102-8K WyreStorm

£0.00 and

SKU: EXP-SP-0102-8K

Quick Code: Q MPN: EXP-SP-0102-8K
£0.00

Out of Stock